tech

Device transmits radio waves with almost no power – without violating the laws of physics

9 Comments
By Joshua R Smith and Zerina Kapetanovic

A new ultra-low-power method of communication at first glance seems to violate the laws of physics. It is possible to wirelessly transmit information simply by opening and closing a switch that connects a resistor to an antenna. No need to send power to the antenna.

Our system, combined with techniques for harvesting energy from the environment, could lead to all manner of devices that transmit data, including tiny sensors and implanted medical devices, without needing batteries or other power sources. These include sensors for smart agriculture, electronics implanted in the body that never need battery changes, better contactless credit cards and maybe even new ways for satellites to communicate.

Apart from the energy needed to flip the switch, no other energy is needed to transmit the information. In our case, the switch is a transistor, an electrically controlled switch with no moving parts that consumes a minuscule amount of power.

In the simplest form of ordinary radio, a switch connects and disconnects a strong electrical signal source – perhaps an oscillator that produces a sine wave fluctuating 2 billion times per second – to the transmit antenna. When the signal source is connected, the antenna produces a radio wave, denoting a 1. When the switch is disconnected, there is no radio wave, indicating a 0.

What we showed is that a powered signal source is not needed. Instead, random thermal noise, present in all electrically conductive materials because of the heat-driven motion of electrons, can take the place of the signal driving the antenna.

No free lunch

We are electrical engineers who research wireless systems. During the peer review of our paper about this research, published recently in Proceedings of the National Academy of Sciences, reviewers asked us to explain why the method did not violate the second law of thermodynamics, the main law of physics that explains why perpetual motion machines are not possible.

Perpetual motion machines are theoretical machines that can work indefinitely without requiring energy from any external source. The reviewers worried that if it were possible to send and receive information with no powered components, and with both the transmitter and receiver at the same temperature, that would mean that you could create a perpetual motion machine. Because this is impossible, it would imply that there was something wrong with our work or our understanding of it.

One way the second law can be stated is that heat will flow spontaneously only from hotter objects to colder objects. The wireless signals from our transmitter transport heat. If there were a spontaneous flow of signal from the transmitter to the receiver in the absence of a temperature difference between the two, you could harvest that flow to get free energy, in violation of the second law.

The resolution of this seeming paradox is that the receiver in our system is powered and acts like a refrigerator. The signal-carrying electrons on the receive side are effectively kept cold by the powered amplifier, similar to how a refrigerator keeps its interior cold by continuously pumping heat out. The transmitter consumes almost no power, but the receiver consumes substantial power, up to 2 watts. This is similar to receivers in other ultra-low-power communications systems. Nearly all of the power consumption happens at a base station that does not have constraints on energy use.

A simpler approach

Many researchers worldwide have been exploring related passive communication methods, known as backscatter. A backscatter data transmitter looks very similar to our data transmitter device. The difference is that in a backscatter communication system, in addition to the data transmitter and the data receiver, there is a third component that generates a radio wave. The switching performed by the data transmitter has the effect of reflecting that radio wave, which is then picked up at the receiver.

A backscatter device has the same energy efficiency as our system, but the backscatter setup is much more complex, since a signal-generating component is needed. However, our system has lower data rate and range than either backscatter radios or conventional radios.

What’s next

One area for future work is to improve our system’s data rate and range, and to test it in applications such as implanted devices. For implanted devices, an advantage of our new method is that there is no need to expose the patient to a strong external radio signal, which can cause tissue heating. Even more exciting, we believe that related ideas could enable other new forms of communication in which other natural signal sources, such as thermal noise from biological tissue or other electronic components, can be modulated.

Finally, this work may lead to new connections between the study of heat (thermodynamics) and the study of communication (information theory). These fields are often viewed as analogous, but this work suggests some more literal connections between them.

Joshua R Smith is a professor of electrical & computer engineering and of computer science and engineering at the University of Washington. **Zerina Kapetanovic is an acting Assistant Professor of Electrical Engineering at Stanford University.**

The Conversation is an independent and nonprofit source of news, analysis and commentary from academic experts.

© The Conversation

©2023 GPlusMedia Inc.

9 Comments
Login to comment

This sounds like the receiver sucking the signal from the transmitter. The analogy used is a heat pump, and they effective suck heat from the source and dump it where needed, they do not create heat (i.e., convert a different form of energy to heat).

Touch credit cards do not have a power source. They send information using energy harvested from the electromagnetic field produced by the reader device.

Anyway, all very interesting if you're a tech nerd.

3 ( +3 / -0 )

Seems plausible. Thermocouples are long proven heat-to-electricity generators, albeit, not very efficient.

It would be interesting to see more of this invention and if it's viable or not.

1 ( +1 / -0 )

One area for future work is to improve our system’s data rate and range, and to test it in applications such as implanted devices. 

It would seem to have abundant applications for RFT implanted in biological tissue given its modalities.

1 ( +1 / -0 )

This tech has, I believe, significant military applications. Radio / radar emissions can be geolocated and targeting, making the emitter vulnerable to attack. But if you can transmit on such low powers there could be opportunities for short range comms, say within a naval force at sea or a ground unit operating clandestinely, that is not detectable from afar.

1 ( +1 / -0 )

you can't violate the laws of physics

1 ( +1 / -0 )

you can't violate the laws of physics

Laws of "classical" physics can be violated in Quantum physics.

Ask Schrödinger's cat!!

0 ( +0 / -0 )

Ask Schrödinger's cat!!

If you interact with the cat, you'll have messed up the experiment. Schrödinger won't be pleased. :-)

1 ( +1 / -0 )

If you interact with the cat, you'll have messed up the experiment. Schrödinger won't be pleased. :-)

Lol. Once the experiment is done, Fluffy does interviews...

1 ( +1 / -0 )

There's been many nice ideas over the Centuries, though very few actually turn out to be practical.

0 ( +0 / -0 )

Login to leave a comment

Facebook users

Use your Facebook account to login or register with JapanToday. By doing so, you will also receive an email inviting you to receive our news alerts.

Facebook Connect

Login with your JapanToday account

User registration

Articles, Offers & Useful Resources

A mix of what's trending on our other sites